Wednesday, August 23, 2017

rotary screw air compressors, Dallas rotary screw air compressors, rotary screw air compressor service,







The Rotary Screw Air Compressor
The rotary screw air compressor produces an ongoing movement to generate power.For certain heavy-duty industrial operations, or a facility that needs to keep running their compressor 24/7 365 days a year, a piston compressor is considered insufficient. In order to get the pressure intensity needed for complex pneumatic and other high-powered tools, you will need to consider buying a rotary screw air compressor.






In a rotary screw compressor, air is compressed with a meshing pair of rotors. As the screws move in rotation, fluids gets sucked in, compressed and ejected. 






So, how does an oil injected rotary screw compressor work?

AIR

The outside air is sucked in by the screw element (air-end) through the air inlet filter. The inlet filter makes sure that all the dust and dirt stays outside.








Load and unload control

Before the air enters the screw element, it passed the inlet valve or unloader valve. This valve opens and closes the air supply to the screw element.

When it’s open, the compressor is in ‘loaded’ condition:
When the valve is closed, is shuts off the air supply to the compressor element: the motor and screw element are turning, but the compressor is not sucking any air in and is not pumping any air to the system.




H&K PUMP





WHAT DOES THE screw compressor element DO?


When the inlet/unloader valve is open, the air enters the compressor screw element.
The screw element works like a pump and it compressed the air. During this process, oil is injected in the element. The oil is there to cool the air, as the air gets very hot during compression. 






Compressed air/oil mixture


This mixture leaves the screw element through a one-way valve. This valve makes sure that the oil cannot flow back into the compressor element through the exit pipe.










WHAT IS THE PURPOSE OF THE OIL SEPARATOR?

It's job is to basically separate the oil and the air through the separator tank. Most of the oil is separated from the compressed air by centrifugal force . The remaining oil is separated by the separator element which looks exactly like a big filter.


The air with oil flows through the separator element and separates the oil from the compressed air. The separated oil is collected at the bottom of the separator and is removed by the scavenge line. It sucks the collected oil back to the compressor element.










WHAT IS THE MINIMUM PRESSURE VALVE?


The minimum pressure valve is a spring-loaded valve that opens at a certain pressure, about 2.5 bar. The minimum pressure valve makes sure that there is always a minimum pressure inside the compressor



www.hkaircompressors.com



The after cooler

The compressed air is still very hot, consequently the compressed air is now cooled by the after cooler before it leaves the compressor. The air temperature after the cooler is around 25 – 40 degrees Celsius.
Because of the cooling down of the air, a lot of water vapor has condensed against the inside of the after cooler. This water is carried with the compressed air towards the air outlet of the compressor.
Moisture trap

The condenstate trap (moisture trap) basically separates the water from the compressed air. The water is drained through a small hose.
Oil flow

The oil is cooled by the oil cooler. The amount of cooling is controlled by a thermostatic valve. If the oil is still cold, the oil cooler is completely by-passed. If the oil is very hot, all the oil is led through the oil cooler. 

The Oil filter

Finally, the oil flows through the oil filter. The oil filters removes all the dirt and dust that has collected in the oil.

















Call: 214-428-2868











Model HP VOLT  PSI CFM Part Number
NxB30 40 230 100 196 FNB30DXX3HXXX
NxB30 40 460 FNB30DXX4HXXX
NxB30 40 230 125 173 FNB30DXX3JXXX
NxB30 40 460 FNB30DXX4JXXX
NxB30 40 230 150 163 FNB30DXX3KXXX
NxB30 40 460 FNB30DXX4KXXX
NxB30 40 230 175 149 FNB30DXX3LXXX
NxB30 40 460 FNB30DXX4LXXX
NxB37 50 230 100 234 FNB37DXX3HXXX
NxB37 50 460 FNB37DXX4HXXX
NxB37 50 230 125 203 FNB37DXX3JXXX
NxB37 50 460 FNB37DXX4JXXX
NxB37 50 230 150 193 FNB37DXX3KXXX
NxB37 50 460 FNB37DXX4KXXX
NxB37 50 230 175 180 FNB37DXX3LXXX
NxB37 50 460 FNB37DXX4LXXX
NxB30 40 230 100 196 FNB30DXD3HXXX
NxB30 40 460 FNB30DXD4HXXX
NxB30 40 230 125 173 FNB30DXD3JXXX
NxB30 40 460 FNB30DXD4JXXX
NxB30 40 230 150 163 FNB30DXD3KXXX
NxB30 40 460 FNB30DXD4KXXX
NxB30 40 230 175 149 FNB30DXD3LXXX
NxB30 40 460 FNB30EXD4LXXX
NxB37 50 230 100 234 FNB37DXD3HXXX
NxB37 50 460 FNB37DXD4HXXX
NxB37 50 230 125 203 FNB37DXD3JXXX
NxB37 50 460 FNB37DXD4JXXX
NxB37 50 230 150 193 FNB37DXD3KXXX
NxB37 50 460 FNB37DXD4KXXX
NxB37 50 230 175 180 FNB37DXD3LXXX
NxB37 50 460 FNB37DXD4LXXX








THERE ARE A LOT OF AIR COMPRESSOR BRANDS IN THE WORLD BUT VERY FEW AIR COMPRESSOR SERVICE CENTERS IN DALLAS, FORT WORTH AND SURROUNDING AREAS.  IF YOU ARE LOOKING FOR INDUSTRIAL AIR COMPRESSORS FOR YOUR SHOP, FACTORY, MANUFACTURING PLANT, THEN CALL US AT: 214-428-2868

WE HAVE BEEN IN BUSINESS FOR 50 YEARS.  WE KNOW HOW TO SERVICE, MAINTAIN AND REPAIR ALMOST ALL BRANDS OF INDUSTRIAL PISTON AND ROTARY SCREW AIR COMPRESSORS.

WWW.HKAIRCOMPRESSORS.COM



CHAMPION PARTS

INGERSOLL RAND PARTS

QUINCY PARTS

CURTIS PARTS

ATLAS COPCO PARTS

JENNY PARTS

GARDNER DENVER PARTS

PISTON COMPRESSOR PARTS

ROTARY SCREW PARTS








Call: 214-428-2868






















Posted by at
Labels: , , , , ,

1 comment:

  1. Medical Testing SolutionsDecember 11, 2021 at 1:12 AM

    Well, that's a nice blog post, i was looking for this kind of information. Finally i got answer, i have read many blog post but don’t get the complete answer. I must say i appreciate your work. Thanks man for providing the best content.

    ReplyDelete

Subscribe to: Post Comments (Atom)